NANO Armacell JIOS Aerogel pipe insulation products Fabric
Basic Info
Model No.: HT-Aerogel-43
Product Description
NANO Armacell JIOS Aerogel pipe insulation products Fabric
NANO Armacell JIOS Aerogel pipe insulation products Fabric
Aerogel insulation felt This insulation insulation material is mainly used in the construction industry and has a good development prospect. It can also be cut as needed during construction. It is mainly used in building interiors, noise reduction systems, vehicles, refrigeration equipment, household appliances for shock absorption, sound absorption and noise reduction. The effect is very satisfactory. Glass wool felt with aluminum foil veneer also has strong resistance to heat radiation. It is an excellent lining material for high temperature workshop, control room, machine room inner wall, compartment and flat top.
Nano aerogel felt physical properties:
Packing form: roll
Thickness: 5mm, 8mm, 10mm
Width: 1500mm
Density: 180-220kg/m3
Applicable temperature: -200 °C - +1000 °C (related to the model)
Hydrophobic: hydrophobic (below 350 ° C)
Thermal conductivity: 0.012 - 0.018w/m·k (at 25 ° C
Silica Aerogel Insulation Blanket Features and functions:
High temperature resistance - long-term use temperature of 400 to 1000 degrees
Thermal conductivity - 2 to 10 times lower than conventional insulation materials, only 0.052w / m. at 800 degrees
Durability - can be used as a permanent layer of insulation, with a service life of 5 to 10 years
Safety and environmental protection - pure electrodeless material combination, good thermal stability, no harmful substances released
Economic analysis - the price is lower than 50% of similar foreign products, 10~30% energy saving than conventional materials
Advantages of nano aerogel insulation felt:
First, the application in the high temperature industry
Nano-aerogel felts are the best choice for equipment that requires insulation while requiring small size and light weight. For example, ladle, torpedo, tundish, etc. in the metallurgical industry can realize the expansion of these devices by using nano-aerogel felt without changing the steel structure, and at the same time, can achieve a good thermal insulation effect. On a 100-ton steel ladle in a steel mill, the nano-aerogel felt was used instead of the traditional heat-insulating board to carry out the experiment. The test results are as follows:
1. Under the condition of the same thickness of the heat insulating material, the temperature of the outer wall of the ladle using the nano aerogel felt is 100-130 lower than that of the outer wall of the ladle using the traditional heat insulating board, which effectively reduces the thermal deformation of the ladle shell. .
2. Under the condition that the outer wall temperature of the ladle is the same, the 20mm thick nano-aerogel felt can replace the traditional heat insulation board of 30mm thickness to realize the expansion of the ladle.
3. Using nano-aerogel felt, the molten steel in the ladle is cooled slowly, which is conducive to the stability of the molten steel temperature.
4. It has good chemical stability, and it does not decompose, degrade, and not powder
Application areas:
Metallurgy: ladle, ladle, tundish, converter, torpedo
Machinery: industrial furnace, electric furnace, furnace door, furnace cover
Automotive: engine heat shield, catalytic exhaust pipe
Petrochemical: cracking furnace, reforming furnace, heating furnace
Electricity: boilers, steam turbines, pipelines
Building materials: ceramic furnace, rotary furnace
Effect:
Reduce the thickness of the insulation
Since the thickness of the hot layer can be greatly reduced, the heat insulating device can be miniaturized and the volume of the device can be increased.
Reduce heat storage
Reducing the heat storage capacity of the insulation layer and greatly shortening the heating time of the kiln, so that not only energy saving, Tianjin Gute nanoporous insulation material can achieve productivity and easy temperature control.
Reduce heat dissipation
Since the use of thinner nanoporous insulation material can achieve thermal insulation, it can reduce the heat dissipation surface area and greatly reduce heat loss. Therefore, the surface temperature of the kiln can be lowered and the working environment can be improved.
Temperature uniformization
By reducing the effect of heat loss, the temperature can be maximized, and as a result, the temperature of the metal solution, the glass solution, and the heat treatment product of the kiln can be more uniform, and the product quality can be improved.
Our service:
Your inquiry regard to our product will be replied within 24hours
Well-trained & experienced staff are to answer all your inquiries in English of course
Working time:8:30am-6:00pm, Monday to Friday
OEM&ODM projects are highly welcomed. We have strong R&D team here to help
Your business relationship with us will be confidential to any third party
Good after-sales service offered, please get back if you got any questions
Product Categories : Aerogel Blanket > Aerogel Felt